Gardenique PPWUMW10 Guía de instalación descargar pdf (Pagina 4)

PLEASE CALL 1-888-755-6750 BEFORE RETURNING TO THE STORE.

WWW.THEPONDBOSS.NET

6. Fill the basin with water, making sure that the plug is closed. Fig. 6

Fig. 6

7. Connect the pump to the transformer. Screw on the locking nut.

Fig. 7

8. Connect the transformer to a proper power source. Fig. 8

Fig. 8

CARE AND MAINTENANCE

• Clean the pump and filter regularly depending upon the environment in which it is operated. Clean

the pump when it is visibly soiled or when a drop in performance is detected.

• Before cleaning, always disconnect the pump from the power source.

• Remove all parts from the pump and clean in warm, soapy water.

• Disassemble the pump cover and remove the impeller cover to expose the impeller assembly. Use

a soft cloth or brush to clean the impeller assembly and the inside of the impeller housing. Refer to

the diagram in the replacement parts list.

TROUBLESHOOTING

• In the event of a leak, use the supplied patch kit in accordance with the directions to repair it.

• If the pump fails to operate:

o Check to make sure the power cord is plugged in and the pump is getting power.

o Check the pump outlet and any tubing, for kinks or obstructions.

o Remove the inlet screen and/or pump cover, and impeller cover to expose the impeller. Turn the

impeller to ensure that it is not broken or jammed.

• If the performance of the pump is not satisfactory or the pump does not flow evenly:

o Check to make sure the pump is completely submerged in water.

o Check to make sure the impeller and the housing are clean.

o Adjust flow control.

• If the LED lights fail to operate:

o Check to make sure the power cord is plugged in and the light is getting power and the unit is

getting power.

GFCI

Transformer

Plug from

pump

1 2 3 4 5 6

Sin comentarios

Gardenique PPWUMW10 Guía de instalación Pagina 4